Datasheet

Section 2 CPU
Rev.6.00 Mar. 18, 2009 Page 46 of 980
REJ09B0050-0600
Table 2.9 System Control Instructions
Instruction Size
*
Function
TRAPA – Starts trap-instruction exception handling.
RTE – Returns from an exception-handling routine.
SLEEP – Causes a transition to a power-down state.
LDC B/W (EAs) → CCR, (EAs) → EXR
Moves the memory operand contents or immediate data to CCR or
EXR. Although CCR and EXR are 8-bit registers, word-size transfers
are performed between them and memory. The upper 8 bits are valid.
STC B/W CCR → (EAd), EXR → (EAd)
Transfers CCR or EXR contents to a general register or memory
operand. Although CCR and EXR are 8-bit registers, word-size
transfers are performed between them and memory. The upper 8 bits
are valid.
ANDC B CCR ∧ #IMM → CCR, EXR ∧ #IMM → EXR
Logically ANDs the CCR or EXR contents with immediate data.
ORC B CCR ∨ #IMM → CCR, EXR ∨ #IMM → EXR
Logically ORs the CCR or EXR contents with immediate data.
XORC B CCR ⊕ #IMM → CCR, EXR ⊕ #IMM → EXR
Logically exclusive-ORs the CCR or EXR contents with immediate
data.
NOP – PC + 2 → PC
Only increments the program counter.
Note: * Size refers to the operand size.
B: Byte
W: Word