Datasheet

Section 8 I/O Ports
Rev.7.00 Feb. 14, 2007 page 281 of 1108
REJ09B0089-0700
PE7 (I/O)
PE6 (I/O)
PE5 (I/O)
PE4 (I/O)
PE3 (I/O)
PE2 (I/O)
PE1 (I/O)
PE0 (I/O)
Port E
D7 (I/O)
D6 (I/O)
D5 (I/O)
D4 (I/O)
D3 (I/O)
D2 (I/O)
D1 (I/O)
D0 (I/O)
8-bit bus mode 16-bit bus mod
e
Figure 8.21 Port E Pin Functions (Modes 4 to 6)
Mode 7
*
: In mode 7, port E pins function as I/O ports. Input or output can be specified for each
pin on a bit-by-bit basis. Setting PEDDR bits to 1 makes the corresponding port E pins output
ports, while clearing the bits to 0 makes the pins input ports.
Port E pin functions in mode 7 are shown in figure 8.22.
PE7 (I/O)
PE6 (I/O)
PE5 (I/O)
PE4 (I/O)
PE3 (I/O)
PE2 (I/O)
PE1 (I/O)
PE0 (I/O)
Port E
Figure 8.22 Port E Pin Functions (Mode 7)
Note: * Modes 6 and 7 are not available in the ROMless versions.