Datasheet

Section 20 Flash Memory (F-ZTAT Version)

Rev. 6.00 Mar. 18, 2010 Page 728 of 982

REJ09B0054-0600

20.5.4 Erase Block Register 2 (EBR2)

EBR2 specifies the flash memory erase area block. EBR1 is initialized to H'00 when the SWE1 bit

in FLMCR1 is 0. Do not set more than one bit at a time, as this will cause all the bits in EBR1 and

EBR2 to be automatically cleared to 0.

• 384-kbyte Flash Memory

Bit Bit Name Initial Value R/W Description

7, 6 — All 0 R/W Reserved

These bits are always read as 0. The write value should

always be 0.

5 EB13 0 R/W When this bit is set to 1, 64 kbytes of EB13 (H'050000 to

H'05FFFF) will be erased.

4 EB12 0 R/W When this bit is 1, 64 kbytes of EB12 (H'040000 to

H'04FFFF) will be erased.

3 EB11 0 R/W When this bit is set to 1, 64 kbytes of EB11 (H'030000 to

H'03FFFF) will be erased.

2 EB10 0 R/W When this bit is set to 1, 64 kbytes of EB10 (H'020000 to

H'02FFFF) will be erased.

1 EB9 0 R/W When this bit is set to 1, 64 kbytes of EB9

(H'010000 to H'01FFFF) will be erased.

0 EB8 0 R/W When this bit is set to 1, 32 kbytes of EB8

(H'008000 to H'00FFFF) will be erased.

• 256-kbyte Flash Memory