Datasheet

Section 8 DMA Controller (DMAC)
Rev. 6.00 Mar. 18, 2010 Page 211 of 982
REJ09B0054-0600
Bit Bit Name Initial Value R/W Description
3
2
1
0
DTF3
DTF2
DTF1
DTF0
0
0
0
0
R/W
R/W
R/W
R/W
Data Transfer Factor 3 to 0
These bits select the data transfer factor
(activation source). There are some
differences in activation sources for channel A
and channel B.
Channel A:
0000: Setting prohibited
0001: Activated by A/D converter conversion
end interrupt
0010: Setting prohibited
0011: Setting prohibited
0100: Activated by SCI channel 0 transmit-
data-empty interrupt
0101: Activated by SCI channel 0 receive-
data-full interrupt
0110: Activated by SCI channel 1 transmit-
data-empty interrupt
0111: Activated by SCI channel 1 receive-
data-full interrupt
1000: Activated by TPU channel 0 compare
match/input capture A interrupt
1001: Activated by TPU channel 1 compare
match/input capture A interrupt
1010: Activated by TPU channel 2 compare
match/input capture A interrupt
1011: Activated by TPU channel 3 compare
match/input capture A interrupt
1100: Activated by TPU channel 4 compare
match/input capture A interrupt
1101: Activated by TPU channel 5 compare
match/input capture A interrupt
1110: Setting prohibited
1111: Setting prohibited