Datasheet

Section 2 CPU
Rev.7.00 Dec. 24, 2008 Page 56 of 698
REJ09B0074-0700
Table 2.10 Block Data Transfer Instruction
Instruction Size Function
EEPMOV.B – if R4L ≠ 0 then
Repeat @ER5+ → @ER6+
R4L–1 → R4L
Until R4L = 0
else next;
EEPMOV.W – if R4 ≠ 0 then
Repeat @ER5+ → @ER6+
R4–1 → R4
Until R4 = 0
else next;
Transfer a data block. Starting from the address set in ER5, transfers
data for the number of bytes set in R4L or R4 to the address location
set in ER6.
Execution of the next instruction begins as soon as the transfer is
completed.