Datasheet

Rev. 3.00, 03/04, page 515 of 830
• HICR1
R/W
Bit Bit Name Initial Value Slave Host Description
7 LPCBSY 0 R  LPC Busy
Indicates that the LPC interface is processing a
transfer cycle.
0: LPC interface is in transfer cycle wait state
• Bus idle, or transfer cycle not subject to
processing is in progress
• Cycle type or address indeterminate during
transfer cycle
[Clearing conditions]
• LPC hardware reset or LPC software reset
• LPC hardware shutdown or LPC software
shutdown
• Forced termination (abort) of transfer cycle
subject to processing
• Normal termination of transfer cycle subject to
processing
1: LPC interface is performing transfer cycle
processing
[Setting condition]
• Match of cycle type and address
6 CLKREQ 0 R  LCLK Request
Indicates that the LPC interface's SERIRQ output is
requesting a restart of LCLK.
0: No LCLK restart request
[Clearing conditions]
• LPC hardware reset or LPC software reset
• LPC hardware shutdown or LPC software
shutdown
• SERIRQ is set to continuous mode
• There are no further interrupts for transfer to the
host in quiet mode
1: LCLK restart request issued
[Setting condition]
• In quiet mode, SERIRQ interrupt output becomes
necessary while LCLK is stopped