Datasheet

Rev. 3.00, 03/04, page 318 of 830
• TCSR_X
This register can be accessed when the KINWUE bit in SYSCR is 0 and the TMRX/Y bit in
TCONRS is 0.
Bit Bit Name Initial Value R/W Description
7 CMFB 0 R/(W)* Compare-Match Flag B
[Setting condition]
When the values of TCNT_X and TCORB_X match
[Clearing condition]
Read CMFB when CMFB = 1, then write 0 in CMFB
6 CMFA 0 R/(W)* Compare-Match Flag A
[Setting condition]
When the values of TCNT_X and TCORA_X match
[Clearing condition]
Read CMFA when CMFA = 1, then write 0 in CMFA
5 OVF 0 R/(W)* Timer Overflow Flag
[Setting condition]
When TCNT_X overflows from H'FF to H'00
[Clearing condition]
Read OVF when OVF = 1, then write 0 in OVF
4 ICF 0 R/(W)* Input Capture Flag
[Setting condition]
When a rising edge and falling edge is detected in
the external reset signal in that order.
[Clearing condition]
Read ICF when ICF = 1, then write 0 in ICF
3
2
OS3
OS2
0
0
R/W
R/W
Output Select 3 and 2
These bits specify how the TMOX pin output level is
to be changed by compare-match B of TCORB_X
and TCNT_X.
00: No change
01: 0 is output
10: 1 is output
11: Output is inverted (toggle output)