Datasheet

Rev. 3.00, 03/04, page 205 of 830
8.6.2 Port 6 Data Register (P6DR)
P6DR stores output data for the port 6 pins.
Bit Bit Name Initial Value R/W Description
7 P67DR 0 R/W
6 P66DR 0 R/W
5 P65DR 0 R/W
4 P64DR 0 R/W
3 P63DR 0 R/W
2 P62DR 0 R/W
1 P61DR 0 R/W
0 P60DR 0 R/W
Normal extended mode (16-bit data bus):
If a port 6 read is performed while the P6DDR bits are
set to 1, the P6DR values are read. If a port 6 read is
performed while the P6DDR bits are cleared to 0, 1 is
read.
Other mode:
P6DR stores output data for the port 6 pins that are
used as the general output port.
If a port 6 read is performed while the P6DDR bits are
set to 1, the P6DR values are read. If a port 6 read is
performed while the P6DDR bits are cleared to 0, the
pin states are read.
8.6.3 Port 6 Pull-Up MOS Control Register (KMPCR6)
KMPCR6 controls the port 6 built-in input pull-up MOSs. This register is accessible when SYSCR
KINWUE is 1. See section 3.2.2, System Control Register (SYSCR).
Bit Bit Name Initial Value R/W Description
7 KM7PCR 0 R/W
6 KM6PCR 0 R/W
5 KM5PCR 0 R/W
4 KM4PCR 0 R/W
3 KM3PCR 0 R/W
2 KM2PCR 0 R/W
1 KM1PCR 0 R/W
0 KM0PCR 0 R/W
Normal extended mode (16-bit data bus):
Operation is not affected.
Other mode:
When the pins are in input state, the corresponding
input pull-up MOS is turned on when a KMPCR6 bit is
set to 1.