Datasheet

Section 10 14-Bit PWM Timer (PWMX)
Rev. 4.00 Sep 27, 2006 page 297 of 1130
REJ09B0327-0400
Bit 7
TEST Description
0 PWM (D/A) in user state: normal operation (Initial value)
1 PWM (D/A) in test state: correct conversion results unobtainable
Bit 6—PWM Enable (PWME): Starts or stops the PWM (D/A) counter (DACNT).
Bit 6
PWME Description
0 DACNT operates as a 14-bit up-counter (Initial value)
1 DACNT halts at H'0003
Bits 5 and 4—Reserved: These bits cannot be modified and are always read as 1.
Bit 3—Output Enable B (OEB): Enables or disables output on PWM (D/A) channel B.
Bit 3
OEB Description
0 PWM (D/A) channel B output (at the PWX1 pin) is disabled (Initial value)
1 PWM (D/A) channel B output (at the PWX1 pin) is enabled
Bit 2—Output Enable A (OEA): Enables or disables output on PWM (D/A) channel A.
Bit 2
OEA Description
0 PWM (D/A) channel A output (at the PWX0 pin) is disabled (Initial value)
1 PWM (D/A) channel A output (at the PWX0 pin) is enabled
Bit 1—Output Select (OS): Selects the phase of the PWM (D/A) output.
Bit 1
OS Description
0 Direct PWM output (Initial value)
1 Inverted PWM output