Datasheet

Section 25 Electrical Characteristics
Rev. 4.00 Jun 06, 2006 page 767 of 1004
REJ09B0301-0400
4. The upper limit of the port 6 applied voltage is V
CC
+0.3 V when CIN input is not
selected, and the lower of V
CC
+0.3 V and AV
CC
+0.3 V when CIN input is selected.
When a pin is in output mode, the output voltage is equivalent to the applied voltage.
5. For flash memory program/erase operations, the applicable ranges are V
CC
= 3.0 V to
3.6 V, T
a
= 0 to +75°C. For the F-ZTAT versions, the test condition is V
CC
= 3.0 V or
higher.
6. Current dissipation values are for V
IH
min = V
CC
–0.5 V and V
IL
max = 0.5 V with all
output pins unloaded and the on-chip pull-up MOSs in the off state.
7. The values are for V
RAM
≤ V
CC
< 2.7 V (mask ROM version), V
RAM
≤ V
CC
< 3.0 V (F-ZTAT
version), V
IH
min = V
CC
× 0.9, and V
IL
max = 0.3 V.