Datasheet

Section 25 Electrical Characteristics
Rev. 4.00 Jun 06, 2006 page 764 of 1004
REJ09B0301-0400
3. IRQ2 includes the ADTRG signal multiplexed on that pin.
4. The upper limit of the port 6 applied voltage is V
CC
+0.3 V when CIN input is not
selected, and the lower of V
CC
+0.3 V and AV
CC
+0.3 V when CIN input is selected.
When a pin is in output mode, the output voltage is equivalent to the applied voltage.
5. Ranges of V
CC
= 4.5 to 5.5 V, T
a
= 0 to +75°C (regular specifications), and T
a
= 0 to
+85°C (wide-range specifications) must be observed for flash memory
programming/erasing.
6. Current dissipation values are for V
IH
min = V
CC
–0.5 V and V
IL
max = 0.5 V with all
output pins unloaded and the on-chip pull-up MOSs in the off state.
7. The values are for V
RAM
≤ V
CC
< 4.0 V, V
IH
min = V
CC
× 0.9, and V
IL
max = 0.3 V.