Datasheet

Section 8 I/O Ports
Rev. 4.00 Jun 06, 2006 page 200 of 1004
REJ09B0301-0400
Modes 2 and 3 (EXPE = 0): In modes 2 and 3 (when EXPE = 0), port 1 pins function as PWM
outputs or I/O ports, and input or output can be specified on a bit-by-bit basis. When a bit in
P1DDR is set to 1, the corresponding pin functions as a PWM output or output port, and when
cleared to 0, as an input port.
The port 1 pin functions are shown in figure 8.4.
P17 (I/O)
P16 (I/O)
P15 (I/O)
P14 (I/O)
P13 (I/O)
P12 (I/O)
P11 (I/O)
P10 (I/O)
Port 1
P1n: Input pin when P1DDR = 0,
output pin when P1DDR = 1
and PWOERA = 0
PW7 (Output)
PW6 (Output)
PW5 (Output)
PW4 (Output)
PW3 (Output)
PW2 (Output)
PW1 (Output)
PW0 (Output)
When P1DDR = 1
and PWOERA = 1
Figure 8.4 Port 1 Pin Functions (Modes 2 and 3 (EXPE = 0))