Datasheet

Section 8 I/O Ports
Rev. 4.00 Jun 06, 2006 page 198 of 1004
REJ09B0301-0400
Port 1 Data Register (P1DR)
7
P17DR
0
R/W
6
P16DR
0
R/W
5
P15DR
0
R/W
4
P14DR
0
R/W
3
P13DR
0
R/W
0
P10DR
0
R/W
2
P12DR
0
R/W
1
P11DR
0
R/W
Bit
Initial value
R/W
P1DR is an 8-bit readable/writable register that stores output data for the port 1 pins (P17 to P10).
If a port 1 read is performed while P1DDR bits are set to 1, the P1DR values are read, regardless
of the actual pin states. If a port 1 read is performed while P1DDR bits are cleared to 0, the pin
states are read.
P1DR is initialized to H'00 by a reset and in hardware standby mode. It retains its prior state in
software standby mode.
Port 1 MOS Pull-Up Control Register (P1PCR)
7
P17PCR
0
R/W
6
P16PCR
0
R/W
5
P15PCR
0
R/W
4
P14PCR
0
R/W
3
P13PCR
0
R/W
0
P10PCR
0
R/W
2
P12PCR
0
R/W
1
P11PCR
0
R/W
Bit
Initial value
R/W
P1PCR is an 8-bit readable/writable register that controls the port 1 on-chip MOS input pull-ups
on a bit-by-bit basis.
In modes 2 and 3, the MOS input pull-up is turned on when a P1PCR bit is set to 1 while the
corresponding P1DDR bit is cleared to 0 (input port setting).
P1PCR is initialized to H'00 by a reset and in hardware standby mode. It retains its prior state in
software standby mode.