Datasheet

Section 3 MCU Operating Modes
Rev. 4.00 Jun 06, 2006 page 85 of 1004
REJ09B0301-0400
H'01FFFF
H'020000
H'000000
H'017FFF
H'01FFFF
H'000000
H'FFEFFF
H'FFE080
H'FFFEFF
H'FFFFFF
H'FFFE50
H'FFFF7F
H'FFFF80
H'FFFF00
H'FFEFFF
H'FFE080
H'FFFEFF
H'FFFE50
H'FFFF7F
H'FFFF80
H'FFFF00
H'FFFFFF
Mode 2/EXPE = 0
(advanced single-chip mode)
On-chip ROM
Reserved area
External address
space
*
2
Mode 2/EXPE = 1
(advanced expanded mode
with on-chip ROM enabled)
Internal I/O registers 2
On-chip RAM
*
1
Internal I/O registers 1
On-chip RAM
(128 bytes)
*
1
External address
space
*
2
On-chip RAM
H'017FFF
On-chip ROM
Reserved area
Internal I/O registers 2
Internal I/O registers 1
On-chip RAM
(128 bytes)
Notes: 1. External addresses can be accessed by clearing the RAME bit in SYSCR to 0.
2. For these models, the maximum number of external address pins is 16. An external address can
only be specified correctly for an area that uses the I/O strobe function.
Figure 3.3 H8S/2133 Memory Map in Each Operating Mode (cont)