Datasheet

Section 10 16-Bit Timer Pulse Unit (TPU)
Rev. 3.00 Sep. 28, 2009 Page 261 of 910
REJ09B0350-0300
Bit Bit Name
Initial
value
R/W Description
3 TGFD 0 R/(W)* Input Capture/Output Compare Flag D
Status flag that indicates the occurrence of TGRD input
capture or compare match in channel 0.
In channels 1 and 2, bit 3 is reserved. It is always read
as 0 and cannot be modified.
[Setting conditions]
• When TCNT = TGRD while TGRD is functioning as
output compare register
• When TCNT value is transferred to TGRD by input
capture signal while TGRD is functioning as input
capture register
[Clearing condition]
When 0 is written to TGFD after reading TGFD = 1
2 TGFC 0 R/(W)* Input Capture/Output Compare Flag C
Status flag that indicates the occurrence of TGRC input
capture or compare match in channel 0.
In channels 1 and 2, bit 2 is reserved. It is always read
as 0 and cannot be modified.
[Setting conditions]
• When the TCNT = TGRC while TGRC is functioning
as output compare register
• When TCNT value is transferred to TGRC by input
capture signal while TGRC is functioning as input
capture register
[Clearing condition]
When 0 is written to TGFC after reading TGFC = 1