Datasheet

Section 7 I/O Ports
Rev. 3.00 Sep. 28, 2009 Page 177 of 910
REJ09B0350-0300
(2) PE0/ExEXCL
The pin function is switched as shown below according to the combination of the EXCLS bit in
PTCNT0 and EXCLE bit in LPWRCR. When the EXCLS bit in PTCNT0 and EXCLE bit in
LPWRCR are set to 1, this pin can be used as the ExEXCL input pin.
Setting
I/O Port
Module
Name
Pin Function
ExEXCL
I/O port PE0 input
(initial setting)
0
7.2.15 Port F
(1) PF7/PWMU5, APF6/PWMU4A, PF5/PWMU3A, PF4/PWMU2A
The pin function is switched as shown below according to the combination of the register setting
of the PWMU and the PFnDDR bit.
Setting
PWMU I/O Port
Module
Name
Pin Function
PWMUmA_OE PFnDDR
PWMU PWMUmA output 1 1
I/O port PFn output 0 1
PFn input
(initial setting)
⎯ 0
(n = 5 to 2, m = 7 to 4)