Datasheet

Section 7 I/O Ports
Rev. 3.00 Sep. 28, 2009 Page 162 of 910
REJ09B0350-0300
(3) P65/KIN5, P64/KIN4, P63/KIN3, P62/KIN2, P61/KIN1, P60/KIN0
When the KMIMn bit in KMIMR of the interrupt controller is cleared to 0, this pin can be used as
the KINn input pin.
The pin function is switched as shown below according to the state of the P6nDDR bit.
Setting
I/O Port
Module
Name
Pin Function
P6nDDR
I/O port P6n output 1
P6n input
(initial setting)
0
(n = 5 to 0)
7.2.7 Port 7
(1) P77/AN7, P76/AN6, P75/AN5, P74/AN4, P73/AN3, P72/AN2, P71/AN1, P70/AN0
Module Name Pin Function
A/D converter ANn/P7n input
(n = 7 to 0)