Datasheet

Section 15 Serial Communication Interface (SCI, IrDA)
Rev. 3.00 Mar 17, 2006 page 662 of 926
REJ09B0283-0300
• Break detection: Break can be detected by reading the RxD pin level directly in case of a
framing error
• Average transfer rate generator (only for H8S/2678R Group): The following transfer rate can
be selected (SCI_2 only)
115.152 or 460.606 kbps at 10.667-MHz operation
115.196, 460.784 or 720 kbps at 16-MHz operation
720 kbps at 32-MHz operation
Clocked Synchronous mode
• Data length: 8 bits
• Receive error detection: Overrun errors detected
Smart Card Interface
• Automatic transmission of error signal (parity error) in receive mode
• Error signal detection and automatic data retransmission in transmit mode
• Direct convention and inverse convention both supported