Datasheet

Section 11 16-Bit Timer Pulse Unit (TPU)

Rev. 3.00 Mar 17, 2006 page 561 of 926

REJ09B0283-0300

TCNT value

TGR

H'0000

CST bit

TGF

Time

Counter cleared by TGR

compare match

Flag cleared by software or

DTC activation

Figure 11.4 Periodic Counter Operation

Waveform Output by Compare Match: The TPU can perform 0, 1, or toggle output from the

corresponding output pin using a compare match.

1. Example of setting procedure for waveform output by compare match

Figure 11.5 shows an example of the setting procedure for waveform output by a compare

match.

Select waveform output mode

Output selection

Set output timing

Start count

[1]

[2]

[3]

[1] Select initial value 0 output or 1 output, and

compare match output value 0 output, 1 output,

or toggle output, by means of TIOR. The set

initial value is output at the TIOC pin until the

first compare match occurs.

[2] Set the timing for compare match generation in

TGR.

[3] Set the CST bit in TSTR to 1 to start the count

operation.

Figure 11.5 Example of Setting Procedure for Waveform Output by Compare Match