Datasheet

Section 10 I/O Ports
Rev. 3.00 Mar 17, 2006 page 470 of 926
REJ09B0283-0300
• P63/TMCI1/TEND1/IRQ11
The pin function is switched as shown below according to the combination of bit DMACS in
PFCR2, bit TEE1 in DMATCR of the DMAC, bit P63DDR, and bit ITS11 in ITSR.
TEE1 0 1
DMACS — 1 0
P63DDR 0 1 0 1 —
P63
input
P63
output
P63
input
P63
output
TEND1
output
IRQ11 interrupt input
*
1
Pin function
TMCI1 input
*
2
Notes: 1. IRQ11 interrupt input when ITS11 = 0.
2. When used as the external clock input pin for the TMR, its pin function should be
specified to the external clock input by the CKS2 to CKS0 bits in TCR_1.
• P62/TMCI0/TEND0/IRQ10
The pin function is switched as shown below according to the combination of bit DMACS in
PFCR2, bit TEE0 in DMATCR of the DMAC, bit P62DDR, and bit ITS10 in ITSR.
TEE0 0 1
DMACS — 1 0
P62DDR 0 1 0 1 —
P62
input
P62
output
P62
input
P62
output
TEND0
output
IRQ10 interrupt input
*
1
Pin function
TMCI0 input
*
2
Notes: 1. IRQ10 interrupt input when ITS10 = 0.
2. When used as the external clock input pin for the TMR, its pin function should be
specified to the external clock input by the CKS2 to CKS0 bits in TCR_0.