Datasheet

Section 19 ROM
Rev.6.00 Sep. 27, 2007 Page 861 of 1268
REJ09B0220-0600
Bit 2—Program-Verify 1 (PV1): Selects program-verify mode transition or clearing for
addresses H'000000 to H'03FFFF. Do not set the SWE1, ESU1, PSU1, EV1, E1, or P1 bit at the
same time.
Bit 2
PV1 Description
0 Program-verify mode cleared (Initial value)
1 Transition to program-verify mode
[Setting condition]
When FWE = 1, SWE1 = 1
Bit 1—Erase 1 (E1): Selects erase mode transition or clearing for addresses H'000000 to
H'03FFFF. Do not set the SWE1, ESU1, PSU1, EV1, PV1, or P1 bit at the same time.
Bit 1
E1 Description
0 Erase mode cleared (Initial value)
1 Transition to erase mode
[Setting condition]
When FWE = 1, SWE1 = 1, and ESU1 = 1
Bit 0—Program 1 (P1): Selects program mode transition or clearing for addresses H'000000 to
H'03FFFF. Do not set the SWE1, PSU1, ESU1, EV1, PV1, or E1 bit at the same time.
Bit 0
P1 Description
0 Program mode cleared (Initial value)
1 Transition to program mode
[Setting condition]
When FWE = 1, SWE1 = 1, and PSU1 = 1