Datasheet

Section 12 8-Bit Timers
Rev.6.00 Sep. 27, 2007 Page 566 of 1268
REJ09B0220-0600
12.2.6 Module Stop Control Register (MSTPCR)
MSTPCRH MSTPCRL
Bit : 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
Initial value : 0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1
R/W : R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W
MSTPCR is a 16-bit readable/writable register that performs module stop mode control.
When the MSTP12 bit in MSTPCR is set to 1, the 8-bit timer operation stops at the end of the bus
cycle and a transition is made to module stop mode. Registers cannot be read or written to in
module stop mode. For details, see section 21.5, Module Stop Mode.
MSTPCR is initialized to H'3FFF by a reset and in hardware standby mode. It is not initialized in
software standby mode.
Bit 12—Module Stop (MSTP12): Specifies the 8-bit timer module stop mode.
Bit 12
MSTP12 Description
0 8-bit timer module stop mode cleared
1 8-bit timer module stop mode set (Initial value)