Datasheet

Section 10 16-Bit Timer Pulse Unit (TPU)
Rev.6.00 Sep. 27, 2007 Page 442 of 1268
REJ09B0220-0600
• 26 interrupt sources
⎯ For channels 0 and 3, four compare match/input capture dual-function interrupts and one
overflow interrupt can be requested independently
⎯ For channels 1, 2, 4, and 5, two compare match/input capture dual-function interrupts, one
overflow interrupt, and one underflow interrupt can be requested independently
• Automatic transfer of register data
⎯ Block transfer, 1-word data transfer, and 1-byte data transfer possible by data transfer
controller (DTC) or DMA controller (DMAC)
*
activation
• Programmable pulse generator (PPG) output trigger can be generated
⎯ Channel 0 to 3 compare match/input capture signals can be used as PPG output trigger
• A/D converter conversion start trigger can be generated
⎯ Channel 0 to 5 compare match A/input capture A signals can be used as A/D converter
conversion start trigger
• Module stop mode can be set
⎯ As the initial setting, TPU operation is halted. Register access is enabled by exiting module
stop mode
Note: * The DMAC is not supported in the H8S/2321.