Datasheet

Section 9 I/O Ports
Rev.6.00 Sep. 27, 2007 Page 430 of 1268
REJ09B0220-0600
Port F Data Register (PFDR)
Bit : 7 6 5 4 3 2 1 0
PF7DR PF6DR PF5DR PF4DR PF3DR PF2DR PF1DR PF0DR
Initial value : 0 0 0 0 0 0 0 0
R/W : R/W R/W R/W R/W R/W R/W R/W R/W
PFDR is an 8-bit readable/writable register that stores output data for the port F pins (PF7 to PF0).
PFDR is initialized to H'00 by a reset, and in hardware standby mode. It retains its prior state in
software standby mode.
Port F Register (PORTF)
Bit : 7 6 5 4 3 2 1 0
PF7 PF6 PF5 PF4 PF3 PF2 PF1 PF0
Initial value : —
*
—
*
—
*
—
*
—
*
—
*
—
*
—
*
R/W : R R R R R R R R
Note: * Determined by state of pins PF
7
to PF
0
.
PORTF is an 8-bit read-only register that shows the pin states. It cannot be written to. Writing of
output data for the port F pins (PF
7
to PF
0
) must always be performed on PFDR.
If a port F read is performed while PFDDR bits are set to 1, the PFDR values are read. If a port F
read is performed while PFDDR bits are cleared to 0, the pin states are read.
After a reset and in hardware standby mode, PORTF contents are determined by the pin states, as
PFDDR and PFDR are initialized. PORTF retains its prior state in software standby mode.