Datasheet

Section 6 Bus Controller
Rev.6.00 Sep. 27, 2007 Page 151 of 1268
REJ09B0220-0600
6.2.3 Wait Control Registers H and L (WCRH, WCRL)
WCRH and WCRL are 8-bit readable/writable registers that select the number of program wait
states for each area.
Program waits are not inserted in the case of on-chip memory or internal I/O registers.
WCRH and WCRL are initialized to H'FF by a reset and in hardware standby mode. They are not
initialized in software standby mode.
WCRH
Bit : 7 6 5 4 3 2 1 0
W71 W70 W61 W60 W51 W50 W41 W40
Initial value : 1 1 1 1 1 1 1 1
R/W : R/W R/W R/W R/W R/W R/W R/W R/W
Bits 7 and 6—Area 7 Wait Control 1 and 0 (W71, W70): These bits select the number of
program wait states when area 7 in external space is accessed while the AST7 bit in ASTCR is set
to 1.
Bit 7
W71
Bit 6
W70 Description
0 0 Program wait not inserted when external space area 7 is accessed
1 1 program wait state inserted when external space area 7 is accessed
1 0 2 program wait states inserted when external space area 7 is accessed
1 3 program wait states inserted when external space area 7 is accessed
(Initial value)