Datasheet

Section 3 MCU Operating Modes
Rev.6.00 Sep. 27, 2007 Page 85 of 1268
REJ09B0220-0600
3.3.10 Mode 11 (H8S/2328B F-ZTAT and H8S/2326 F-ZTAT Only)
This is a flash memory boot mode. For details, see section 19, ROM.
Except for the fact that flash memory programming and erasing can be performed, operation in
this mode is the same as in advanced single-chip mode.
3.3.11 Modes 12 and 13
Modes 12 and 13 are not supported and must not be set.
3.3.12 Mode 14 (H8S/2328B F-ZTAT and H8S/2326 F-ZTAT Only)
This is a flash memory user program mode. For details, see section 19, ROM.
Except for the fact that flash memory programming and erasing can be performed, operation in
this mode is the same as in advanced expanded mode with on-chip ROM enabled.
3.3.13 Mode 15 (H8S/2328B F-ZTAT and H8S/2326 F-ZTAT Only)
This is a flash memory user program mode. For details, see section 19, ROM.
Except for the fact that flash memory programming and erasing can be performed, operation in
this mode is the same as in advanced single-chip mode.
3.4 Pin Functions in Each Operating Mode
The pin functions of ports A to F vary depending on the operating mode. Table 3.4 shows their
functions in each operating mode.