Datasheet

Section 11 Programmable Pulse Generator (PPG)
Rev.6.00 Sep. 27, 2007 Page 543 of 1268
REJ09B0220-0600
Bit 1—Group 1 Non-Overlap (G1NOV): Selects normal or non-overlapping operation for pulse
output group 1 (pins PO7 to PO4).
Bit 1
G1NOV Description
0 Normal operation in pulse output group 1 (output values updated at compare match A
in the selected TPU channel) (Initial value)
1 Non-overlapping operation in pulse output group 1 (independent 1 and 0 output at
compare match A or B in the selected TPU channel)
Bit 0—Group 0 Non-Overlap (G0NOV): Selects normal or non-overlapping operation for pulse
output group 0 (pins PO3 to PO0).
Bit 0
G0NOV Description
0 Normal operation in pulse output group 0 (output values updated at compare match A
in the selected TPU channel) (Initial value)
1 Non-overlapping operation in pulse output group 0 (independent 1 and 0 output at
compare match A or B in the selected TPU channel)
11.2.7 Port 1 Data Direction Register (P1DDR)
Bit : 7 6 5 4 3 2 1 0
P17DDR P16DDR P15DDR P14DDR P13DDR P12DDR P11DDR P10DDR
Initial value : 0 0 0 0 0 0 0 0
R/W : W W W W W W W W
P1DDR is an 8-bit write-only register, the individual bits of which specify input or output for the
pins of port 1.
Port 1 is multiplexed with pins PO15 to PO8. Bits corresponding to pins used for PPG output must
be set to 1. For further information about P1DDR, see section 9, I/O Port.