User manual
Table Of Contents
- Notes regarding these materials
- Precautions on Using The Product Described Herein
- For Inquiries About Product Contents or This Manual
- Preface
- Contents
- 1. Overview
- 2. Contents of the Product Package
- 3. Usage Precautions
- 4. Starter Kit Usage Conditions
- 5. Hardware Setup
- 6. Software Setup
- Appendix 1 Contents of CD-ROM
- Appendix 2 Part List
- Appendix 3 M3A-2152G02 Product Standards
- 1. Overview
- 2. Functional Specifications
- 2.1 Configuration of the Power Supply
- 2.2 FP Select Circuit
- 2.3 MOD Select Circuit
- 2.4 Serial I/O Interface
- 2.5 Oscillator Circuit
- 2.6 General-purpose Output Port LED Indicators
- 2.7 General-purpose Input Port Control Circuit
- 2.8 Analog Port Input Control Circuit
- 2.9 CAN Interface
- 2.10 JTAG Peripheral Circuit
- 3. Reference Data
- REVISION HISTORY
32176 Group
Starter Kit User’s Manual M3A-2152
REJ10B0224-0300/Rev.3.00 Jan. 2007 Page 29 of 82
(3) M3S-KD32R (Discontinued)
M3S-KD32R (Debugger for the Starter Kit) is included. This debugger software (Windows
-compliant version) is used to control the microcomputer on the evaluation board from the host
PC by connecting it and the host PC with LPT parallel cable through the M3A-2195 (SDI
Interface Board). Its directory structure is shown below.
(English version)
Eng+Tool+Kd32r+
+ KD32RNE.pdf : M3S-KD32R release note
+ W95E : Setup programs for M3S-KD32R
(Japanese version)
Jpn+Tool+Kd32r+
+ KD32RNJ.pdf : M3S-KD32R release note
+ W95J : Setup programs for M3S-KD32R
(4) M3S-UFLA32R
M3S-UFLA32R is included. M3S-UFLA32R is the software to program into internal flash
memory on M32R/ECU series 3217x, 3218x Group microcomputers from Windows version
personal computer(PC/AT), by using UART communication. Its directory structure is shown
below.
(English version)
Eng+Tool+Ufla32r+
+ UFLA32Rue.pdf : M3S-UFLA32R user’s manual
+ W95E : Setup programs for M3S-UFLA32R
(Japanese version)
Jpn+Tool+Ufla32r+
+ UFLA32Ruj.pdf : M3S-UFLA32R user’s manual
+ W95J : Setup programs for M3S-UFLA32R