Specifications

Renesas Microcomputers General Presentation

Development Environment - Emulator

State of Support for MCUs by the E8a Emulator

(as a Programming Tool)

The combination of the E8a emulator and development toolkit (Flash Development Toolkit V.4.00)

enables on-board programming. This combination can support SH, H8SX, and H8 Family MCUs

with flash memory that are not supportable by the E8 emulator.

Refer to the following URL for details of the MCUs supported by the E8a emulator and

version 4.00 of the Flash Development Toolkit.

http://www.renesas.com/media/products/tools/flash_prom_programming/flash_development_toolkit/ver_4/rej10j1669_flashtoolkit_s.pdf

Note: 1. The programming of 740 Family

products (QzROM versions) requires

an IC socket board.

Boards for some other products are

under development. Refer to the

Schedule of Main Tool Products on the

RSSI site for the schedule.

2. The E8a emulator cannot be used in

the debugging of SH and H8SX

Family products. When this is required,

the E10A-USB on-chip debugging

emulator must be used instead of the

E8a.

Configurations as a Programming Tool

Serial (RS-232C) cable

IC socket board

Flash Development

Toolkit Ver.4.XX

USB adopter board or E8a

MCUs supporting USB-boot

NEW