Specifications

ManualsBrandsRenesas ManualsNetwork CardCompact Emulator M30620T-CPE

Emulators

Development Environment

Microcomputer Tool Marketing Dept.

Renesas Microcomputers General Presentation

10/30/2007 Rev.10.00

Safety • Service • Satisfaction

-Renesas Microcomputer-

Summary of content (84 pages)

PAGE 1
Safety • Service • Satisfaction -Renesas Microcomputer- Renesas Microcomputers General Presentation Development Environment Emulators Microcomputer Tool Marketing Dept. 10/30/2007 Rev.10.00 1 ©2007. Renesas Technology Corp., All rights reserved.
PAGE 3
NEW Introduction of development tool Application Notes Emulator E8 Document Title Renesas E8 Emulator Application Notes Introductory Guide for H8/300H Tiny E10A-USB E6000H Renesas E10A-USB Emulator Application Notes Introductory Guide for SH/Tiny (SH7125) H8SX Family Emulator E6000H Performance Measurement H8SX Family Emulator E6000H Usage of Real-time RAM Monitoring E6000 H8/300H CPE H8S Family Emulator E6000 Application Notes How to Use the Sequential H8/300H Tiny Series Compact Emulator Operating B
PAGE 6
E10A-USB Supported Device Roadmap 06/S Target MCUs NOW 07/K SH7263 H8S/2117F SH7203 H8SX/163xF SH7722 H8SX/164xF H8S/2125F H8SX/1622F SH7671 SH7764 07/S H8SX/1668RF H8S/H8SX Family next H8SX/1658RF SH-2A core next H8SX/1568F SH-4A core next H8SX/1558F H8S/2472 SH7721 SH7285 SH7265 SH7205 Improvement SH7243 SH7730 E10A-USB Lite HS0005KCU11H New E10A-USB H/W for SH-Dual core External flash memory download function (H8S Internal Flash Rom MCU) 6 ©2007. Renesas Technology Corp.
PAGE 7
Features of the E10A-USB (1) • The OCD emulator excellent in cost performance. E10A-USB can be used with all microcomputers which has H-UDI function*. The body size is very small as 97 mm × 65 mm × 22 mm. *: except SH7055, SH7058, SH7059 • Real time Emulation The real time emulation in the highest operation frequency of CPU is available. • Excellence Operationally This emulator is possible to debug for user program with pointing device (mouse etc.
PAGE 8
Features of the E10A-USB (2) • Substantial Debug Function Debug efficiency improvement by substantial break and trace function. Set break point and break condition in exclusive window, display trace information to window. Also, provide abundant command line function. • Debug for User System in product configuration The debug target configuration is almost same as the user’s filial product system.
PAGE 9
System configuration of the E10A-USB Emulator (1) High-performance Embedded Workshop Connector for E10A-USB Note1: Note that the pin assignments of the H-UDI port connector is different from those of the connector manufacturer 9 ©2007. Renesas Technology Corp., All rights reserved.
PAGE 10
System configuration of the E10A-USB Emulator (2) Notes on Installation for Prospective Purchasers You do not need to purchase a Device Group Addition (License Tool for Device Group Additions) to support the first device group, the E10A-USB is shipped with an installer that allows the user to support any one of these. Our range of Device Group Additions are for adding subsequent device groups to an existing system. Refer to the Product Configuration on the E10A-USB home page for further details.
PAGE 11
System configuration of the E10A-USB Emulator (3) How to install additional device groups If the user subsequently wishes to upgrade their E10A-USB to support an additional device group, Device Group Additions (License Tool for Device Group Additions) are available as additional purchases (subject to release schedule). The Device Addition is supplied as a CD-ROM with the desired Group software. This is used in conjunction with the original E10A-USB unit.
PAGE 12
Table1 E10A-USB Product lineup Part No.
PAGE 13
Table3 E10A-USB support device list for H8S Family and H8SX Family Device group Supported device Shipment schedule H8S device group H8S/2212F, H8S/2212UF, H8S/2218F, H8S/2218UF, H8S/2377F, H8S/2377RF,H8S/2378F, H8S/2378RF, H8S/2374RF*, H8S/2372RF*, H8S/2371RF*, H8S/2370RF*, H8S/2374F*, H8S/2372F*, H8S/2371F*, H8S/2370F*, H8S/2364F*, H8S/2362F*, H8S/2361F*, H8S/2360F*, H8S/2367F, H8S/2368F, H8S/2168F, H8S/2167F, H8S/2166F, H8S/2437F, H8S/2114F, H8S/2339EF, H8S/2329EF, H8S/2319EF, H8S/2170F, H8S/2171F, H8
PAGE 14
Table4 E10A-USB support device list for SH family Device group Supported device Shipment schedule SH-2 device group SH7615, SH7616, SH7047F, SH7144F, SH7145F, SH/Tiny Debug MCU Board R5F70834A, R5F70835A, R5F70844A, R5F70845A, R5F70854A, R5F70855A, R5F70865A, R5E70835R, R5E70845R, R5E70855R, R5E70865R, R5E71464R, R5E71494R (R5E71491R), SH7618, SH7618A, SH7619, SH7606, SH7125, SH7124, R5F71464R, R5F71494R (R5F71491R), R5F71464A, R5F71494A In mass production SH-2A device group SH7206, SH7211F, SH7261,
PAGE 15
NEW “E10A-USB” for Multi-core devices • New “E10A-USB” variation for SH7205 and SH7265 - Multi Core + Single Debugging Module in the device. Single debugging module can control two CPUs. - Single 38-pin H-UDI connector can be used for dual core. CPU #0 CPU #1 H-UDI and AUD H-UDI connector SH7205/65 User Target System HS0005KCU04H 15 ©2007. Renesas Technology Corp., All rights reserved.
PAGE 16
NEW E10A-USB for SH7205/7265 features CPU#0 CPU#1 On Chip Break 10 Performance Analysis 4 AUD Trace 32 Kcycles Branch instructions/Memory Access/Software Condition can be set each CPU Build-In Trace 512 Cycles 4 512 Cycles 1024 Cycles 16 ©2007. Renesas Technology Corp., All rights reserved.
PAGE 17
NEW Build Example for AMP CPUID#1 Workspace CPUID#2 Workspace Build Build ELF/DWARF ELF/DWARF S-Type S-Type New tool! unifile.exe Transfer binary to FLASH S-Type 17 Download only debug information ©2007. Renesas Technology Corp., All rights reserved.
PAGE 18
SH/Tiny Debug MCU Board "SH/Tiny debug MCU board" is an optional board for SH/Tiny Series (SH7124 and SH7125) to use the E10A-USB on-chip debugging emulator as an in-circuit emulator. This optional board allows debug functions of which the in-circuit emulator originally has, such as performance measurement and trace, to be used with E10A-USB emulator, and all dual purpose terminals (for H-UDI and user functions) of the SH/Tiny Series (SH7124 and SH7125) to be used for user functions exclusively.
PAGE 20
Product type name of SH/Tiny debug MCU board Series Group E10A-USB (HS0005KCU02H) + SH/Tiny Debug MCU board SH/Tiny Debug MCU board SH7124 HS7124EDB01H-E1 (PLQP0048JA-A (FP-48F)) HS7124EDB01H (PLQP0048JA-A (FP-48F)) HS7125EDB01H-E1 (PLQP0064KB-A (FP-64K)) HS7125EDB01H (PLQP0064KB-A (FP-64K)) HS7125EDB02H-E1 (PRQP0064GB-A (FP-64A)) HS7125EDB02H (PRQP0064GB-A (FP-64A)) SH/Tiny SH7125 20 ©2007. Renesas Technology Corp., All rights reserved.
PAGE 21
Specifications of SH/Tiny debug MCU board 21 Supported MCU SuperH RISC engine Family SH/Tiny (SH7125) Series SH7124, SH7125 Group Power supply to SH/Tiny Debug MCU board The following two ways of powering are available. (1) To supply via the Vcc terminal on the target board. (Max. 300 mA) (2) To supply externally via the power terminal on the SH/Tiny Debug MCU board. (5 V) Connection to target system Plug into the IC socket on the target board.
PAGE 22
NEW Features in using with SH/Tiny Debug MCU board SH/Tiny Debug MCU board AUD trace (256 Kcycles) AUD break (8) Real-time profile C0 coverage AUD trace(16 Kbranches) Bus trace (1 Kcycles) E10A-USB + Performance measurement All user pins: available SH/Tiny Debug MCU board Downloading a program GO/BREAK STEP PC Break condition On-chip event point Reading of memory /Writing of memory Watching variables Branch trace (8 branches) 22 E200F Real-time profile E10A-USB ©2007. Renesas Technology Corp.
PAGE 24
HS0005ECK01H [Overview] User interface cable for Mictor 38-pin connector is a optional cable to connect the E10A-USB emulator (HS0005KCU02H) to the Mictor 38-pin connector (2-5767004-2: Tyco electronics AMP K.K.) mounted on the user system. [System Configuration] [Product type name] HS0005ECK01H [Following boards need HS0005ECK01H] - SH7785 Solution Engine - SH7722 Solution Engine *: Mictor 38 pin-connector is also used when connecting the E200F emulator for SH7785 (R0E0200F2EMU00) to the user system.
PAGE 25
Pin Assignments of S0005ECK01H Pin NO. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 Signal*4 N.C. N.C. MPMD(GND) N.C. UCON#(GND)*3 AUDCK N.C. ASEBRK#/ BRKACK*2 RESET#*2 N.C. TDO UVCC_AUD N.C. UVCC TCK N.C. TMS N.C. TDI Input/ Output*1 Output Input/ Output Output Output Output Output Input Input Input Note Pin NO. 20 21 22 23 24 25 26 27 User reset 28 29 30 31 32 33 34 35 36 37 38 Signal*4 N.C. TRST# *2 N.C. N.C. AUDATA3 N.C. AUDATA2 N.C. AUDATA1 N.C. AUDATA0 N.C. AUDSYNC#*2 N.C. AUDRST#*2 N.C.
PAGE 26
E10A-USB Lite Nickname: E10A-USB Lite Product Name: HS0005KCU11H Features - Supported device groups H8S/ H8SX/ SH-2/ SH-2A These 4-device group licenses are pre-installed at shipment. - The other device group license can not be added to E10A-USB Lite. - Renesas will ship E10A-USB Lite to oversea customer, but not to Japan. - Debug function of E10A-USB Lite is same as HS0005KCU01H. - Low price. 26 ©2007. Renesas Technology Corp., All rights reserved.
PAGE 27
The pin number assignments of the connector (14-pin type) The pin number assignments of the 14-pin connector differ from those of the E8 emulator. however, the physical location is the same. 8⇒⇒⇒⇒⇒⇒14 2⇒⇒⇒⇒⇒⇒14 1⇒⇒⇒⇒⇒⇒7 E10A-USB 1⇒⇒⇒⇒⇒⇒13 E8 The pin number assignments of the connector differ from those of the connector manufacturer. 27 ©2007. Renesas Technology Corp., All rights reserved.
PAGE 28
The function of the download to the external Flash memory for SH The E10A-USB emulator for SuperH family (SH7047F/SH7144F/SH7145F is excluded) have the function of the download to the external Flash memory. This function supports only the download of the program, and cannot edit the data of external Flash memory in the memory window. Moreover, the software break cannot be set to the program in the external Flash memory. Please use the hardware break. 28 ©2007. Renesas Technology Corp.
PAGE 29
Preparation to download program to the external Flash memory (1) 1. Creating the write and erase modules 2. Setting to download the user program to the external Flash memory When E10A-USB download the program to the external Flash memory, SH microcomputer on the User system writes data to the external Flash memory. When E10A-USB write to the external Flash memory, the writing method (address and how to send data) is different according to each Flash memory manufacturer and the width of connected bus.
PAGE 31
Preparation to download program to the external Flash memory (2) 1. Creating the write and erase modules The download function of E10A-USB usually writes the program to RAM area. 2. Setting to download the user program to the external Flash memory When E10A-USB download the program to the external Flash memory, it is necessary to use the write and erase modules, and write the user program.
PAGE 32
Preparation to download program to the external Flash memory (3) 1. Creating the write and erase modules 2. Setting to download the user program to the external Flash memory 3. Downloading the program 32 ©2007. Renesas Technology Corp., All rights reserved. Please download the user program which you want to download to the external flash memory using the program loading function as well as the program download to RAM area.
PAGE 33
Introduce of application note It is possible to download the sample program and the application notes that introduces the point of customize, and the setting of the Loading flash memory page from the following WEB. • E10A-USB site http://www.renesas.com/fmwk.jsp?cnt=e10a_usb_tools_product_landing.
PAGE 36
NEW The function of download to the external Flash memory of E10A-USB for H8SX and H8S (1) The E10A-USB emulator for the H8SX supports debugging in the external flash memory. • Function E10A-USB emulator for the H8SX supports the following function.
PAGE 37
NEW The function of download to the external Flash memory of E10A-USB for H8SX and H8S (2) • Application note It is necessary to make the program (write and erase modules) for writing the user program to the external Flash memory. Please confirm the data sheet of the external Flash memory and make the program (write and erase modules).
PAGE 38
E10A-USB Emulator information on the WEB http://www.renesas.com/e10a_usb Here is a site for software version and support microcomputer information. Here is a site for external flash memory download program. Here is a site for emulator related documents. Here is a site for Debug MCU Board. Here is a site for FAQ. Here is a site for software version-up program. Here is a site for HS0005ECK01H. 38 ©2007. Renesas Technology Corp., All rights reserved.
PAGE 40
E200F Supported Device Roadmap ′06/S Target MCUs ′07/K R5F708xxA SH7263 R5F71464R SH7203 R5F7149xR ′07/S NOW SH7142 SH7764 SH7780 for R0E0200F2EMU00 SH7243 SH7285 SH7781 for R0E0200F2EMU00 SH-MobileR (SH7722) Improvement 40 Install Manager was introduced. ©2007. Renesas Technology Corp., All rights reserved.
PAGE 41
Feature of E200F (1) Real time emulation - The Real time emulation is available in the highest operation frequency of CPU and peripheral I/O.
PAGE 42
System Configuration of E200F (PC interface) PC interface USB cable (USB 2.0) HOST: Windows PC HEW (High-performance Embedded Workshop) Target system Notice: E10A-USB Emulator software for SH requires SuperH RISC engine C/C++ compiler package Ver.6 or later. Microcomputer of SH-4A core and SH4AL-DSP core requires SuperH RISC engine C/C++ compiler package Ver.8 or later. Microcomputer of SH-2A core requires SuperH RISC engine C/C++ compiler package Ver.9 or later. 42 ©2007. Renesas Technology Corp.
PAGE 43
E200F emulator for SH7785 - R0E0200F2EMU00 - • E200F full-spec emulator with enhanced debugging functions Achievement of 600-MHz trace (AUD clock = 300 MHz, Double Data Rate). The SSTL18 trace technology that is the new method of the AUD trace method is established. • Function of automatic adjustment of trace data The substrate design guideline etc. to the user system are only the routings with exactly the same wire-length, and impedance matches (50 Ω).
PAGE 44
Function outline by product (1) 44 1. E200F main unit 1. E200F basic function is as same as E10A-USB. The followings are the added function on the E10A-USB. 2. USB2.0 (High-speed communication with host PC) USB1.1 (Full-speed communication with host PC) 3. 256-Kcycle trace acquisition. 4. Conditional trace is available by AUD trace information analyzing. Trace start/stop, sequential condition match trace 5. Performance analyzing is available without break the program.
PAGE 45
Function outline by product (2) 45 3. Evaluation chip unit 1. Allows debugging without user system. 2. Allows debugging using AUD for AUD nonsupport device. 3. Allows debugging using AUD for non-mounted H-UDI/AUD connector. 4. Evaluation chip unit is used with User interface board. 4. User interface board 1. User interface board is necessary to connect Evaluation chip unit to the user circuit board. 2. User interface board is different in the each package. 3.
PAGE 46
Function outline by product (3) 6. Expansion profile unit 1. Comparison with standard configuration Real-time profile function - Function measurement should be within the range of 12 MB (4 MB for standard component) from an AUD terminal output of the CPU. Execution time of function Number of the function calls - Number of function counted: 60/20 k for standard configuration 46 7. Peripheral I/O analyzer unit 1.
PAGE 47
E200F Emulator information on the WEB http://www.renesas.com/e200f Here is a site for emulator related documents. Here is a site for software version-up program. Here is a site for FAQ. 47 ©2007. Renesas Technology Corp., All rights reserved.
PAGE 50
Features and target device by E10T-USB Features • Debugging is enabled using the actual MCU on the user system • The included USB interface makes the E10T-USB usable with either a laptop PC or desktop PC.
PAGE 51
E10T-USB Emulator System Configuration High-performance Embedded Workshop E10T-USB HS0005TCU01H Actual MCU H8/3664F User system interface cable Dedicated port connector (E10T compatible) User system Personal computer * The program must be downloaded to the internal flash memory. 51 ©2007. Renesas Technology Corp., All rights reserved.
PAGE 52
E10T-USB Emulator information on the WEB http://www.renesas.com/e10t_usb Here is a site for emulator related documents. Here is a site for software version-up program. 52 ©2007. Renesas Technology Corp., All rights reserved.
PAGE 54
E8a Emulator System Configuration Development environment is unified to previous emulator debuggers. or E8, E7 compatible 14-pin user interface connector Actual MCU User system The High-performance Embedded Workshop: a graphical user interface that lets users build and debug applications from the same window. Attention: The debug function is not supported for SH, H8SX, and H8S micons. 54 ©2007. Renesas Technology Corp., All rights reserved.
PAGE 55
E8a Supported Device Roadmap ′07/4 ′08/4 NOW Target MCUs 38D2 R8C/2E,2F R8C/2G,2H R8C/2J R8C/2K,2L M16C/30P M16C/64 H8/38547 H8/38537 H8/38524 H8/38504 Improvement V.1.01 R00 Ver.1.00 R00 V.1.02 R00 ′07/7 E8a is released 55 ©2007. Renesas Technology Corp., All rights reserved.
PAGE 56
Features of the E8a emulator E8a Emulator is an on-chip debugger and is a flash memory programmer also. Reasonably priced and packed with special features, E8a products fully support speedy market-entry for the low-cost system products. Not only sophisticated various debug features with High-performance Embedded Workshop, E8a offers flash memory programming features by using Flash Development Toolkit.
PAGE 57
NEW State of Support for MCUs by the E8a Emulator (as a Programming Tool) The combination of the E8a emulator and development toolkit (Flash Development Toolkit V.4.00) enables on-board programming. This combination can support SH, H8SX, and H8 Family MCUs with flash memory that are not supportable by the E8 emulator. Refer to the following URL for details of the MCUs supported by the E8a emulator and version 4.00 of the Flash Development Toolkit. http://www.renesas.
PAGE 58
NEW Changes and Additions to Functions (1) Better Usability! 740 R8C M16C M32C H8 The macro function can be used to set break events. This command enables recording of the operation of setting break events. Better Usability! H8 Break event settings can be tracked in source files in the same way as software break settings. Setting information are saved with the session. Therefore, the break event settings can be recovered automatically on the next start-up.
PAGE 59
NEW Changes and Additions to Functions (2) Better Usability! R8C M16C M32C Event breaks can now be set during program execution. Better Usability! H8 The frequency input dialog box is not displayed for MCUs with fixed communications frequencies. Better Functionality! 740 R8C M16C M32C “Debugging in the CPU programming mode” has been added as a dedicated mode for the debugging of programs that apply the CPU programming mode.
PAGE 60
NEW Changes and Additions to Functions (3) *Not supported for the R8C/10 to 13 Groups. Better Functionality! R8C M16C M32C A start/stop function has been added, allowing the execution of routines specified by the user immediately after the user program is stopped or immediately before it starts. The user can thus have the selected functions run when the program stops because of a break or is restarted after a break, etc. 1.
PAGE 61
E8a Emulator information on the WEB http://www.renesas.com/e8a Here is a site for emulator related documents. Here is a site for switchover from E8 to E8a Here is a site for software version-up program. 61 ©2007. Renesas Technology Corp., All rights reserved.
PAGE 64
E6000 System Configuration High-performance Embedded Workshop Host computer LAN Optional LAN adapter E6000 User system interface cable (Optional) PCI board PC Interface cable PCMCIA card E6000 station External probe User system USB adapter Attention: Two or more E6000s cannot be used at the same time when connecting them with one PC by using USB interface. 64 ©2007. Renesas Technology Corp., All rights reserved.
PAGE 65
Features of the E6000 • Compact size - 220 × 160 × 57 mm • Oscillation circuit at the end of the user system interface cable • Easy-to-use debugging functions due to environment supporting Windows (Windows 2000 or XP) Since the High-performance Embedded Workshop is supported, the debugging and the build can be performed in the same window. Need the H8S, H8/300 C/C++ compiler package Ver.4 or upper version.
PAGE 66
Options of the E6000 E6000 station (Including the High-performance Embedded Workshop) User system interface cable Host system interface (PCMCIA, PCI, LAN, USB) PC User system Add-on memory SIMM Bus monitor Note: The bus monitor is provided as standard or optional depending on the supported MCU. 66 ©2007. Renesas Technology Corp., All rights reserved.
PAGE 67
E6000 Optional I/O Board Type 1 Optional board list Supported device Type 1 Inserted into the E6000 emulator station H8S/2258 Group E6000 emulator HS2633EPI61H Type 2 Optional board list Optional I/O board Supported device Optional I/O board H8S/2140B HS2140EIO61H (LPC board) HS2160EIO61H (LPC board) HS3857EIO60H (Expansion board) H8S/2160B H8/3857 Group Type 2 Connected between the E6000 emulator station and the user cable Optional I/O board Optional I/O board HS2258EIO61H (IEBus) H8/3854 Gro
PAGE 68
E6000 Emulator information on the WEB http://www.renesas.com/e6000 Here is a site for emulator related documents. Here is a site for software version-up program. 68 ©2007. Renesas Technology Corp., All rights reserved.
PAGE 70
Features Despite being small, the compact emulator incorporates rich debugging functionality, including real-time tracing, making it competitive with full-spec. emulators. Also, it is a low-price emulator. • Compact design and low price Much smaller main unit than conventional emulator system. Low price due to mounting frequently-used functions only.
PAGE 71
Function Comparison: Compact and Full-Spec Emulators for H8/300H Tiny Series (Reference) Function MCU mode Emulation memory Software breakpoints Hardware break Compact Emulator R0E436640CPE00 Single-chip mode External SRAM 64 points 2 points (switchover with trace point) Prefetch/access Combination of hardware breaks Exception detection AND/OR/Synchronous AND Bus count: 255 times Real-time trace 64 Kcycles Address, data, read/write cycle, memory area types, status Whether to write or not when an event
PAGE 72
Compact Emulator Support Groups for the H8/300H Tiny Series • Bundled with accessory (by MCU package) and compact emulator body MCU group package type package number type number product component H8/3664, H8/3694 H8/3687, H8/36064 H8/36087, H8/36079* H8/36077*, H8/36094* 64-pin and 0.8-mm-pitch QFP PRQP0064GB-A (FP-64A) R0E436640CPE10 Compact emulator body R0E436640CPE00 and conversion board for 64-pin and 0.
PAGE 73
Compact Emulator Support Groups for the H8/300H Tiny Series information on the WEB http://www.renesas.com/cpe Click “R0E436640CPE00” to see information of compact emulator support group for the H8/300H Tiny Series Here is a site for emulator related documents. Here is a site for software version-up program. 73 ©2007. Renesas Technology Corp., All rights reserved.
PAGE 77
System Configuration of the E6000H Emulator PC interface E6000H Emulator 94 (W) x 222 (H) x 282 mm (D) PCI board Evaluation chip board PC card LAN adapter Install High-performance Embedded Workshop 77 ©2007. Renesas Technology Corp., All rights reserved.
PAGE 78
Features of the E6000H Emulator • Real time emulation - Real-time emulation enabled at the chips internal and external maximum frequency (max.
PAGE 79
E6000H Product Lineup and Supported Devices *: Under development Target device SH7059 SH7058S E6000H main unit SH7058 HS7058EPH60H HS7059EPH60H SH7046, SH7048 SH7148, SH7101 SH7047, SH7049 SH7144 SH7145 H8SX/1650, 1657 H8SX/1653 H8SX/1654 H8SX/1663 H8SX/1664 H8SX/1651 H8SX/1622 H8SX/1638 H8SX/1648 H8SX/1658R H8SX/1668R H8SX/1525, 1527 H8SX/1582 H8SX/1527R H8SX/1544 79 HS7046EPH60H User system interface HS7058ECF61H (PRQP0256KB-A (Previous code FP-256H)) HS7058ECB61H ( (Previous code BP-272)) HS7058E
PAGE 80
User System Interface (Except HS1527ECH61H, HS1582ECH61H, HS1544ECH61H) Connection with the Dedicated Connectors Connection with the IC Socket Evaluation chip board Trace cable Evaluation chip board Trace cable User system interface board IC socket Dedicated connectors User system 80 ©2007. Renesas Technology Corp., All rights reserved.
PAGE 81
User System Interface (HS1527ECH61H, HS1582ECH61H, HS1544ECH61H) Connection with the IC Socket Cable body Cable head User system interface cable IC socket User system 81 ©2007. Renesas Technology Corp., All rights reserved.
PAGE 82
E6000H Emulator information on the WEB http://www.renesas.com/e6000h Here is a site for emulator related documents. Here is a site for software version-up program. 82 ©2007. Renesas Technology Corp., All rights reserved.