User's Manual

Precautions
The following precautions should be observed when operating Target Board for RX23W product:
The Target Board for RX23W is only intended for use in a laboratory environment under ambient temperature and
humidity conditions. A safe separation distance should be used between this product and any sensitive equipment. Its
use outside the laboratory, classroom, and study area or in area not conform to the protection requirements of the
Electromagnetic Compatibility Directive could lead to prosecution.
This product generates, uses, and can radiate radio frequency energy and may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular installation. If any harmful
interference to radio or television reception occurs by turning the equipment off or on, you are encouraged to correct
the interference by one or more of the following measures;
 Ensure attached cables do not lie across the equipment
 Reorient the receiving antenna
 Increase the distance between the equipment and the receiver
 Connect the equipment into an outlet on a circuit different from that which the receiver is connected
 Power down the equipment when not in use
 Contact the dealer or an experienced radio/TV technician for help
NOTE: It is recommended that wherever possible shielded interface cables are used.
This product is potentially susceptible to certain EMC phenomena. It is recommended to take following measures in
order to migrate them;
 Do not use mobile phones within 10m of the product when in use.
 Take ESD precautions when handling the equipment.
The Target Board for RX23W neither represents an ideal reference design for an end product nor fulfils the regulatory
standards for an end product.