User's Manual

Target Board for RX23W 7. Handling Precautions
R01UHxxxEG0100
Rev.0.60 Page 22 of 28
Nov. 26, 2019
7. Handling Precautions
Board Thickness
Please be extra careful when handling the Target Board for RX23W as the board is thin (1.6 mm).
Additional Load
When adding loads by USB power supply, the maximum operational current is 300 mA at 3.3 V, current is 100
mA at 5 V operation.
When adding loads by external power supply, the maximum operational current is 500 mA under any operating
voltage.
Substrate Remodelling
Any modification of the board (including changing the cut pattern) shall be conducted on a user’s own
responsibility.
Target Board connection limit
It is not possible to connect to multiple Target Boards from the same host PC.