Users Manual

R01UH0823EJ0110 Rev.1.10 Page 1568 of 1852
Nov 30, 2020
RX23W Group 44. 12-Bit A/D Converter (S12ADE)
DIAGM Bit (Self-Diagnosis Enable)
The DIAGM bit enables or disables self-diagnosis.
Self-diagnosis is used to detect a failure of the 12-bit A/D converter. Specifically, one of the internally generated voltage
values 0, the reference voltage × 1/2, and the reference voltage is converted. When conversion is completed, information
on the converted voltage and the conversion result is stored into the self-diagnosis data register (ADRD). ADRD can
then be read out by software to determine whether the conversion result falls within the normal range (normal) or not
(abnormal). Self-diagnosis is executed once at the beginning of each scan, and one of the three voltages is converted.
When self-diagnosis is selected in group scan mode, self-diagnosis is separately executed in groups A and B.
The DIAGM bit should be set while the ADCSR.ADST bit is 0.
ADRFMT Bit (A/D Data Register Format Select)
The ADRFMT bit specifies flush-right or flush-left for the data to be stored in ADDRy, ADRD, ADTSDR, ADOCDR,
ADDBLDR, ADCMPDR0, ADCMPDR1, ADWINLLB, or ADWINULB.
The ADRFMT bit should be set while the ADCSR.ADST bit is 0.
For details on the format of each data register, see
section 44.2.1, A/D Data Registers y (ADDRy) (y = 0 to 7, 16 to
20, 27), A/D Data Duplication Register (ADDBLDR), A/D Temperature Sensor Data Register (ADTSDR), A/D
Internal Reference Voltage Data Register (ADOCDR)
, section 44.2.2, A/D Self-Diagnosis Data Register
(ADRD)
, section 44.2.25, A/D Compare Function Window A Lower-Side Level Setting Register (ADCMPDR0),
section 44.2.26, A/D Compare Function Window A Upper-Side Level Setting Register (ADCMPDR1), section
44.2.33, A/D Compare Function Window B Lower-Side Level Setting Register (ADWINLLB)
, and section
44.2.34, A/D Compare Function Window B Upper-Side Level Setting Register (ADWINULB)
.