Installation Guide

THE STEPS
• Measure and cut a hole in the countertop matching the diameter of the drain pipe.
*A larger hole may be required to accommodate a thicker sink bottom
• If the bowl has a curved bottom it will require a sink ring. Position the ring on the counter over
the drain hole, then rest the basin on the ring.
• If the bowl has a at bottom it can be rested directly on the counter without a sink ring.
• Install the drain.
872.241.0016
Toledo, Ohio
[e-mail]
Renesinks.com
VESSEL SINKS
Installation Guide
ABOVE COUNTER
RECESSED
INTO COUNTER