Specifications

WWW.MANUALS.WS
WWW.MANUALS.WS
3
1
1
2
NU739_1_G1-FRA.qxd 16/12/04 11:30 Page 1.69
NU739-1 - B73
C:\Documentum\Checkout\NU739_1_T1-ENG.win 18/1/2005 13:49
-page77
1.69
EXTERIOR LIGHTING AND SIGNALS
Side lights
Turn the end of switch 1
until the symbol is opposite mark 3.
The instrument panel lights up, the
brightness can be adjusted using
knob 2.
Dipped beam headlights
Automatic operation
With the engine running, the
dipped beam headlights are
switched on or off automatically
depending on the level of exterior
light, without the need to operate
stalk 1 (position 0).
This function can be deactivated or
reactivated.
- To deactivate it, with the ignition
switched on and engine stopped,
turn stalk 1 twice consecutively
from position 0 to side lights. This
action is confirmed by an audible
signal.
Automatic operation (continued)
- To activate it, with the ignition
switched on and the engine
stopped or running, turn stalk 1
twice consecutively from position 0
to side lights. This action is
confirmed by an audible signal.
-Togotomainbeamposition,pull
stalk 1 towards you. To return to
the dipped headlight position,
pull the stalk towards you again.
- The lights go out when the engine
is stopped, when the driver's door
is opened or when the vehicle is
locked with the RENAULT Card.
Manual operation
Turn the e nd of st al k 1 until the
symbol faces mark 3.
An indicator light lights up on the
instrument panel in all cases.