Specifications

WWW.MANUALS.WS

25046

NU739_1_G1-FRA.qxd 16/12/04 11:29 Page 1.61

NU739-1 - B73

C:\Documentum\Checkout\NU739_1_T1-ENG.win 18/1/2005 13:49

-page69

1.61

TRIP COMPUTER AND WARNING SYSTEM (continued)

Examples of display

selections by pressing 2

Interpreting the display

i) Oil change distance / Range

Distance left before the next service.

There are several scenarios:

• range less than 900 miles (1,500 km) or next service date planned within two

months. The symbol flashes (for 30 seconds if the display is not selected

on “service distance”, otherwise the "service distance" display all the time), the

value is replaced by dashes, and depending on the vehicle, the message "service"

appears on the information display.

• mileage equal to 0miles(0km)or date of service reached. The picture

appears all the time regardless of the information selected on the display. The

value is replaced by dashes, and depending on the vehicle, the message "have oil

changed rapidly" appears on the information display.

Resetting the display after service in accordance with the maintenance program

The mileage before oil change/service must only be reset after a service complying

with the recommendations in the Maintenance Service booklet. If you decide to

change the oil more frequently, do not reset this data each time the oil is changed.

This prevents the replacement interval from being exceeded for other parts

included in the maintenance programme.

With the ignition switched on, select the "mileage before service" information on

the display. Keep key 2 pressed for more than 10 seconds. The value on the display

flashes four times and is then replaced by the reset mileage before oil change value.

This flashes four times. Release key 2, the value is lit up and stored.