Specifications

WWW.MANUALS.WS
WWW.MANUALS.WS
A
NU739_1_G2-FRA.qxd 20/12/04 10:33 Page 2.18
NU739-1 - B73
C:\Documentum\Checkout\NU739_1_T2-ENG.win 14/1/2005 19:01
-page18
2.18
TYRE PRESSURE MONITOR
This system continuously monitors
the tyre pressures.
The tyre pressures must be adjusted
when cold (refer to the "tyre
pressure information" for the
values).
If tyre pressures cannot be checked
when the tyres are cold,the
recommended pressures must be
increased by 0.2 to 0.3 bar (3 PSI).
Never deflate a hot tyre.
This function is an
additional driving aid.
However, the function
does not take the place of
the driver. It cannot, therefore,
under any circumstances replace
the vigilance or the
responsibility of the driver.
Check the tyre inflation
pressures, including the spare
wheel, once a month.
Operating principle
Each wheel (except the spare wheel)
has a sensor, in the inflation valve,
which periodically measures the
tyre pressure.
The driver is constantly informed of
the correct tyre pressure and
possible variations on the
information display A.
The information display shows the
tyre pressures when ignition is
switched on (for approximately
20 seconds) or if there is a fault
when driving.