Specifications

external lights and signals .................... (up to the end of the DU)
lights:
dipped beam headlights ................................... (current page)
lights:
side lights .........................................................(current page)
signals and lights .................................. (up to the end of the DU)
1.87
ENG_UD25453_4
Eclairages et signalisations extérieures (X83 - Renault)ENG_NU_881-5_X83_Renault_1
Exterior lighting and signals
EXTERIOR LIGHTING AND SIGNALS (1/3)
u
Side lights
Turn the end of stalk 1 until the symbol
is opposite mark 2.
The instrument panel will light up.
k
Dipped beam
headlights
Turn the end of stalk 1 until the symbol
is opposite mark 2.
An indicator light on the instrument
panel will come on.
Automatic operation (depending on
vehicle)
With the engine running, the dipped
beam headlights are switched on or off
automatically depending on the level of
ambient light, without the need to oper-
ate stalk 1 (position 0).
This function can be deactivated or re-
activated.
To activate or deactivate this function,
with the ignition on and engine stopped,
move the end of stalk 1 twice in succes-
sion from position 0 to the side light po-
sition.
1
2
1
Before driving at night, check that the electrical equipment is operating
correctly and adjust the headlight beams (if your vehicle is not carrying
its normal load). As a general precaution, check that the lights are not ob-
scured (by dirt, mud, snow or objects being transported).
If driving on the left in a left-hand
drive vehicle (or vice versa), drivers
must have the lights adjusted by an
authorised dealer for the duration of
the trip.