Specifications

wiper blades ..........................................................(current page)
5.34
ENG_UD21094_3
Balais d’essuie-vitre (X83 - Renault)ENG_NU_881-5_X83_Renault_5
Wiper blades
WIPER BLADES
Replacing windscreen wiper
blades
– Lift the wiper arm 3.
– Turn the wiper blade 1 until it is hori-
zontal.
– Press tab 2 and slide the wiper blade
downwards to release hook 4 from
the wiper arm.
– Slide the blade (A) then lift it (B).
To refit
To refit the wiper blade, proceed in re-
verse order to removal. Make sure that
the blade is correctly locked in position.
Rear screen wiper blade
– Lift the wiper arm 5.
– Pivot blade 6 until some resistance
is met.
– Pull the blade to release it (move-
ment C).
To refit
Proceed in the reverse order to re-
moval. Ensure that the blade is prop-
erly clipped.
1
2
3
4
A
B
C
6
5
– In frosty weather, make
sure that the wiper blades
are not stuck by ice (to
avoid the risk of the motor
overheating).
– Check the condition of the wiper
blades.
Replace the wiper blades as soon
as they begin to lose efficiency
(approximately once a year).
Whilst changing the blade, take care
not to drop the arm onto the window
after it has been removed as this
may break the window.
Check the condition of the wiper
blades. You are responsible for their
service life:
– clean the blades, windscreen and
rear screen regularly with soapy
water;
– do not use them when the wind-
screen or rear screen are dry;
– free them from the windscreen or
rear screen when they have not
been used for a long time.