Specifications

lifting the vehicle
changing a wheel ............................(up to the end of the DU)
wheelbrace ........................................... (up to the end of the DU)
tool kit ................................................... (up to the end of the DU)
changing a wheel..................................(up to the end of the DU)
practical advice .....................................(up to the end of the DU)
puncture................................................(up to the end of the DU)
jack ....................................................... (up to the end of the DU)
5.2
ENG_UD21246_3
Bloc outils / Enjoliveur (X83 - Renault)ENG_NU_881-5_X83_Renault_5
Jaune Noir Noir texte
Tool kit/Hubcap
TOOL KIT (1/2)
Depending on the vehicle, tool kit 1 is
located under the driver’s seat.
To take it out, rotate the kit until it can
be removed.
Lift tool kit cover A.
The jack is designed for
wheel changing purposes
only. Under no circum-
stances should it be used
for carrying out repairs or to gain
access under the vehicle.
Jack 2.
Special end piece 3 for the emergency
spare wheel.
Offset wrench 4.
Hubcap tool 5.
Ratchet wrench 6.
Towing hitch 7.
Jack extension piece 8.
1
A
2
8
3
7
4
5
6
Nothing should be placed
on the floor area in front of
the driver as such objects
may slide under the pedal
during braking manoeuvres, thus
obstructing its use.