Specifications

4.6
ENG_UD25450_3
Niveau huile moteur : appoint/remplissage (X83 - Renault)ENG_NU_881-5_X83_Renault_4
Jaune Noir Noir texte
– Unscrew cap 1;
– unclip funnel 3 from its housing if
necessary;
– open the upper and lower covers of
the funnel;
– position it over the oil filling neck;
– top up the level (as a guide, the ca-
pacity between the minimum and
maximum reading on the dipstick 2
is between 1.5 and 2 litres, depend-
ing on the engine);
Engine oil level: topping up/filling
ENGINE OIL LEVEL: topping up/filling (1/3)
Topping up/filling
The vehicle must be parked on level
ground and the engine should be cold
(for instance, before the engine is
started up for the first time in the day).
Engine oil grade
Refer to the Maintenance Service
Booklet for your vehicle for information
regarding which grade of oil to use.
– wait for approximately 10 minutes to
allow the oil to flow into the engine;
– check the level using the dipstick 2
(as described above).
Once the operation has been com-
pleted, ensure that the dipstick is
pushed in as far as it will go or that the
cap-type dipstick is completely screwed
in.
1
2
1
3
3
1
2
Do not exceed the MAX level and
remember to refit cap 1 and to stow
away funnel 3.