Specifications

rear bench seat.....................................(up to the end of the DU)
3.31
ENG_UD21075_4
Banquettes arrière: dépose / pose (X83 - Renault)ENG_NU_881-5_X83_Renault_3
removing/fitting
REAR BENCH SEATS: functions (1/2)
Functions of bench seats 1
and 2
(depending on the vehicle)
These are removed and refitted in the
same way.
Bench seat 1 can be fitted in the first or
last row.
Bench seat 2 can only be fitted in the
first row.
Note: in all cases, if the bench seat is
not equipped with catch 3, it is fixed.
Removal
First, release the side seat belts by un-
locking them from their unit.
– On each side of the bench seat,
press on latch 3 then pull it forwards
(movements A and B);
– lift it (movement C);
– move the bench seat towards the
rear of the vehicle to release the rear
anchorage (movement D);
– lift the bench seat (movement E);
– move the bench seat towards the
rear again (movement F) to release
the front anchorage points;
– remove the bench seat.
Depending vehicle, it is not
permitted to swap bench
seats 1 and 2.
1
2
A
B
C
3
D
E
F
3
For safety reasons, carry
out any adjustments when
the vehicle is not being
driven.