Specifications

parking distance control........................(up to the end of the DU)
2.28
ENG_UD21238_4
Aide au parking (X83 - Renault)ENG_NU_881-5_X83_Renault_2
Jaune Noir Noir texte
Parking distance control
PARKING DISTANCE CONTROL (1/2)
Operating principle
Ultrasonic sensors, fitted in the vehi-
cle’s rear bumper, measure the dis-
tance between the vehicle and an ob-
stacle when reversing.
This measurement is indicated by
beeps which become more frequent the
closer you come to the obstacle, until
they become a continuous beep when
the vehicle is approximately 30 centi-
metres from the obstacle.
There is a beep when changing to re-
verse gear.
Note: make sure that the ultrasonic
sensors are not blocked (by dirt, mud,
snow, etc.).
Operating faults
When the system detects an operating
fault there will be a 5-second, continu-
ous warning beep when reverse gear is
selected. Consult an approved dealer.
This function is an addi-
tional aid that indicates the
distance between the vehi-
cle and an obstacle whilst
reversing, using sound signals.
Under no circumstances should it
replace the driver’s care or respon-
sibility whilst reversing.
The driver should always pay at-
tention to sudden incidents during
driving: always ensure that there
are no moving obstacles (such as a
child, animal, pram or bicycle, etc.)
or small, narrow objects such as
stones or posts in your path when
manoeuvring.