Specifications
handbrake.............................................(up to the end of the DU)
2.9
ENG_UD17679_1
Gear lever (L43 GOM3/EURO - Renault)ENG_NU_949-3_L43_Renault_2
Pull lever 4 slightly, press button 3 and
then lower the lever to the floor.
Pull lever 4 upwards and make sure the
vehicle is immobilised.
Gear lever/handbrake
follow
the grid drawn on knob 1, and depend-
ing on the vehicle, lift ring 2 against the
gear lever knob to select reverse.
refer
to the information on the “Automatic
gearbox” in Section 2.
The reversing lights will come on as
soon as reverse gear is selected with
the ignition on.
When stationary and de-
pending on the slope and/or
vehicle load, it may be nec-
essary to pull up the hand-
brake at least two extra notches and
engage a gear (1
st
or reverse gear)
for vehicles with a manual gearbox
or position for vehicles with an au-
tomatic transmission.
Make sure that the hand-
brake is properly released
when driving (red indicator
light off), otherwise over-
heating may occur.
An impact to the underside
of the vehicle (e.g.: striking
a post, raised kerb or other
street furniture) may result
in damage to the vehicle (e.g.: de-
formation of an axle).
To avoid any risk of accident, have
your vehicle checked by an ap-
proved Dealer.










