Specifications

Jaune Noir Noir texte
2.19
ENG_UD21041_2
Système de surveillance de pression des pneumatiques (L43 GOM3/EURO - Renault)ENG_NU_949-3_L43_Renault_2

If you wish to swap the wheels around,
you  consult an approved dealer
to reinitialise the system.
To mark the correct position of the
wheel, note the colour of ring 4 (after
cleaning, if necessary) on each valve:
A yellow ring
B black ring
C red ring
D green ring
 

Each of the sensors incor-
porated in the valves 3 is
dedicated to a single wheel:
under no circumstances
should you swap the wheels, with-
out resetting the system.
There is a risk of incorrect informa-
tion which could have serious con-
sequences.


The emergency spare wheel has no
sensor and cannot therefore be de-
tected by the system.
When it is fitted to the vehicle, the mes-
sage “Tyre pressure sensors absent” is
displayed on the instrument panel.

This operation requires specific equip-
ment (wheels, tyres, wheel trims, etc.).
Consult an approved dealer to fit new
tyres. The use of any other accessory
may prevent the system from operating
correctly.

Because the sensors built into the
valves are specially designed, use only
products approved by our Technical
Department.


There are some precautions which
must be taken. Consult an approved
dealer.

