Specifications

bulbs
changing .........................................(up to the end of the DU)
changing a bulb ....................................(up to the end of the DU)
lights:
dipped beam headlights ..................(up to the end of the DU)
lights:
direction indicators ..........................(up to the end of the DU)
lights:
side lights ........................................(up to the end of the DU)
lights:
main beam headlights ......................................(current page)
bulbs
changing .........................................(up to the end of the DU)
lights
front .................................................(up to the end of the DU)
indicators ..............................................(up to the end of the DU)
lights
changing bulbs ................................(up to the end of the DU)
5.16
ENG_UD29526_2
Projecteurs avant : remplacement des lampes (X98 - Renault)ENG_NU_955-2_X98_Renault_5
Jaune Noir Noir texte
Dipped beam headlight
Remove cover A to access the bulb
holder.
To change the bulb:
– remove cover B;
– disconnect wiring 2;
– unclip spring 3 and remove the bulb.
Bulb type: H7
Headlights (changing bulbs)
FRONT HEADLIGHTS: changing bulbs (1/3)
The engine may be hot
when carrying out opera-
tions in close proximity. In
addition, the engine cooling
fan can come on at any moment.
Risk of injury.
B
Main beam headlight
To change the bulb:
– remove cover C;
– disconnect wiring 4;
– unclip spring 5 and remove the bulb.
Bulb type: H1
It is essential to use anti-U.V. 55W
bulbs so as not to damage the plastic
on the headlights.
Do not touch the bulb glass. Hold it
by its base.
When the bulb has been changed,
make sure you refit the cover correctly.
C
2
4
5
3
Direction indicator lights
Turn the bulb holder 1 a quarter of a
turn and take out the bulb.
Bulb type: PY24.
Once the bulb has been replaced,
check that it is properly secured.
1
A
Deactivate the Stop and
Start function for any opera-
tion performed in the engine
compartment.