Specifications

5.4
ENG_UD26493_1
Crevaison, roue de secours (X98 - Renault)ENG_NU_955-2_X98_Renault_5
Jaune Noir Noir texte
After changing a wheel, position the
replaced wheel on support 7, with the
valve facing the ground. Clip cable 5
in its housing 6, then push the wheel
under the boot.
Ensure that tab 8 is positioned towards
the rear of the vehicle.
Position yourself behind the vehicle and
pull handle 4 to raise the wheel until it is
anchored under the vehicle.
To carry out this operation, the cable
must be unwound.
If the cable has been wound back up on
its own, unwind it again as follows:
– pull the handle to unwind the cable;
– press the button located under
handle 4 to hold the unwound cable,
then guide it down;
– recover the cable from underneath
the vehicle.
You may refit the wheel.
To refit a wheel
PUNCTURE, EMERGENCY SPARE WHEEL (3/4)
4
5
6
7
8
Do not refit a wheel with an alloy
wheel rim or a wheel larger than 16”
under the vehicle.
Make sure that no-one has their fingers close to the cable when you
move the handle: risk of injury.