Specifications

13B-2
V1
MR-453-X79-13B000$010.mif
13B
DCM 1.2 injection
Program No.: 4C
Vdiag No.: 08
1. SCOPE OF THIS DOCUMENT
This document presents the fault finding method applicable to all computers with the following specifications:
2. PREREQUISITES FOR FAULT FINDING
Documentation type:
Fault finding procedure (this manual):
– Assisted fault finding (integrated into the diagnostic tool), Dialogys.
Wiring Diagrams:
–Visu-Schéma (CD-ROM).
Type of diagnostic tools:
– CLIP + sensor
Special tooling required:
3. REMINDER:
Procedure
To run fault finding on the vehicle computers, switch on the ignition.
Depending on the type of vehicle equipment, proceed as follows:
To cut off the + after ignition feed, proceed as follows:
Vehicles: LOGAN / SANDERO / THALIA 2 / SYMBOL
2
Engines: K9K 718, 740, 790, 792, 794, 796, 880, 890.
Function concerned: K9 DELPHI (DCM 1.2)
COMMON RAIL Direct diesel injection
Name of computer: DCM 1.2 injection
Program No.: 4C
Vdiag No.: 08
Special tooling required
Diagnostic tool
Multimeter
Elé. 1590 112-track computer bornier
Elé. 1681 Universal bornier
Mot. 1711 Injector flow measuring kit
For vehicles with radio frequency remote control/key,
switch on the ignition with the key.
For vehicles with radio frequency remote control/key,
switch off the ignition with the key.
DCM1.2_V08_PRELI
DIESEL INJECTION
Fault finding – Introduction