Specifications

82A-14
ENGINE IMMOBILISER
Transponder ring: Removal - Refitting
VEHICLE WITH KEY
82A
a Remove the lower cover (7) .
a Disconnect the connectors.
a Remove the bolts (8) under the lower half cowling.
a Unclip the lower and upper half cowling.
a Pull the lower half cowling out from the steering col-
umn adjustment handle.
II - OPERATION FOR REMOVAL OF PART
CONCERNED
a Unclip the two antenna/transponder ring tabs (10) .
a Remove the antenna/transponder ring.
a Disconnect the connector (9) .
REFITTING
I - REFITTING OPERATION FOR PART
CONCERNED
a Clip on the antenna/transponder ring.
a Connect the antenna/transponder ring connector.
II - FINAL OPERATION
a Refit the lower half-shell.
a Clip the upper half cowling onto the lower half cowl-
ing.
a Tighten the bolts (8) under the lower half cowling.
a Connect the connectors on the lower cover (7) .
a Refit the lower cover (7) .
a Tighten the bolts (3) , (5) .
a Clip on:
- the plastic rivet,
- the dashboard side panel,
- the trim (1) ,
- the door seal,
112277
112375
112376
112370