Specifications

82A-11
ENGINE IMMOBILISER
Ignition switch: Removal - Refitting
82A
a Remove the bolt (11) .
a Disconnect the connector.
a Position the ignition key between the first and sec-
ond position (+Accessories and +APC) (12) .
a Press on the retaining lug (13) .
a Remove the ignition switch.
REFITTING
I - REFITTING PREPARATIONS OPERATION
a
II - REFITTING OPERATION FOR PART
CONCERNED
a Position the ignition key between the first and sec-
ond position (+Accessories and +APC) (12) .
a Press on the retaining lug (13) .
a Fit the ignition switch.
116715
108441
Note:
To protect against tampering, always secure the
ignition switch with a shear bolt.
Be sure to recover the sheared-off part of the
bolt after it has been tightened.
108441